Error 10BAT_DOCP2VanMoof S3 / X3

VanMoof Error 10 on your S3 or X3: discharge current too high

Error 10 is called BAT_DOCP2: Discharge Over Current Protection 2. The battery had to supply more current than permitted and the battery management system switched off. That can be caused by heavy load on the motor, but also by a short circuit further along in the system. A current measurement under load shows which part is causing the peak.

Symptoms

  • The display shows Error 10
  • The assistance cuts out when accelerating hard or climbing
  • The bike switches off unexpectedly while riding
  • After switching it back on, it rides normally again for a while

Possible causes

  • A motor drawing more current than normal, for example due to wear
  • A short circuit or leakage current in the wiring harness
  • A battery with increased internal resistance

How VanFoom fixes Error 10

  1. 1Reading out the error history and intake
  2. 2Current measurement under load to trace the peak
  3. 3Repairing the motor, wiring harness or battery with original VanMoof parts
  4. 4Test ride with a load test before handover

Assistance cutting out while you're riding is unsafe. We're usually done within 7 working days.

Error 10? We'll fix it.

Book your repair online or give us a call. From S2 to S6, every error code, every part, with genuine VanMoof parts and a warranty.