Error 13BAT_COTPVanMoof S3 / X3

VanMoof Error 13 on your S3 or X3: too warm to charge

Error 13 is listed in the VanMoof error code list as BAT_COTP: Charge Over Temperature Protection. The battery is too warm to charge and the protection blocks the charging process, because charging at this temperature damages the cells. After a ride in the sun or straight after heavy use, that's normal. If the fault stays with a cold battery, something is wrong with the temperature measurement.

Try this yourself first

  1. Move the bike out of the sun, indoors or into the shade, and let it cool down for about an hour before charging.
  2. Just back from a ride? Then wait a little anyway: the battery is warm from use.
  3. Then connect the charger again. If it charges now, the protection simply worked as intended.

Didn't work, or does the message come back? Then we'll take a look.

Symptoms

  • The display shows Error 13 when you connect the charger
  • The fault appears right after a ride or after standing outside in the sun
  • Once it has cooled down, the bike does charge
  • The battery feels warm

Possible causes

  • The battery is warm from use or from the sun: normal, protective behaviour
  • A temperature sensor reporting values that are too high
  • Internal heating from a battery with increased resistance

How VanFoom fixes Error 13

  1. 1Reading out and measuring the temperature sensors if the code stays with a cold battery too
  2. 2Checking for internal heating caused by increased resistance in the battery
  3. 3Repairing or replacing the affected module with original parts
  4. 4Charge test at room temperature before handover

If the code stays while the battery feels cold, we're usually done within 7 working days.

Error 13? We'll fix it.

Book your repair online or give us a call. From S2 to S6, every error code, every part, with genuine VanMoof parts and a warranty.