Error 12BAT_CUTPVanMoof S3 / X3

VanMoof Error 12 on your S3 or X3: too cold to charge

Error 12 is called BAT_CUTP: Charge Under Temperature Protection. The battery is too cold to charge safely, so the battery management system blocks charging. The manufacturer notes that charging at this temperature is bad for the battery. Let the bike warm up indoors first. If the fault also comes back at room temperature, the temperature sensor or the BMS is the suspect.

Try this yourself first

  1. Bring the bike or the battery indoors and let it come up to room temperature for at least two hours. Don't take the battery out when it's freezing outside: let it warm up gently first.
  2. Only connect the charger once the battery feels hand-warm, not cold.
  3. If it charges then, it was simply too cold and nothing is broken. From now on, charge your bike indoors.

Didn't work, or does the message come back? Then we'll take a look.

Symptoms

  • The display shows Error 12 when you connect the charger
  • The battery doesn't start charging
  • The fault mainly appears in winter or after standing outside
  • Indoors, once warmed up, the bike charges as normal

Possible causes

  • The battery is simply too cold: normal, protective behaviour
  • A temperature sensor reporting values that are too low
  • A BMS fault in the temperature measurement

How VanFoom fixes Error 12

  1. 1Reading out and measuring the temperature sensors if the code stays at room temperature too
  2. 2Checking whether the BMS processes the sensor value correctly
  3. 3Repairing or replacing the sensor or BMS module with original parts
  4. 4Charge test at room temperature before handover

In winter this code is often not a fault. If the fault stays indoors too, we'll take a look.

Error 12? We'll fix it.

Book your repair online or give us a call. From S2 to S6, every error code, every part, with genuine VanMoof parts and a warranty.