Error 14BAT_DUTPVanMoof S3 / X3

VanMoof Error 14 on your S3 or X3: too cold for assistance

Error 14 is called BAT_DUTP: Discharge Under Temperature Protection. The battery is too cold to supply power safely, so the pedal assistance cuts out. In winter, that behaviour is by design. If you also get this code at normal temperatures, it points to a sensor measuring incorrectly or a problem in the battery management system.

Try this yourself first

  1. Keep the bike indoors overnight instead of outside or in a cold shed.
  2. Let the battery come up to room temperature before you set off; allow an hour or two after a cold night.
  3. If the assistance then works normally again, the battery was protecting itself from the cold and nothing is broken.

Didn't work, or does the message come back? Then we'll take a look.

Symptoms

  • The display shows Error 14
  • No pedal assistance in cold weather
  • Once warmed up, the bike works normally again
  • The range is much shorter in winter

Possible causes

  • The battery is too cold: normal, protective behaviour
  • A temperature sensor reporting values that are too low
  • A BMS that processes the sensor value incorrectly

How VanFoom fixes Error 14

  1. 1Reading out and measuring the sensors if the code also comes back at room temperature
  2. 2Checking whether the BMS processes the temperature value correctly
  3. 3Repairing or replacing the affected module with original parts
  4. 4Function test under load before handover

If the fault also comes back with a warm battery, we measure it thoroughly: usually ready within 7 working days.

Error 14? We'll fix it.

Book your repair online or give us a call. From S2 to S6, every error code, every part, with genuine VanMoof parts and a warranty.