Error 43SHIFTER_NOT_IN_GEARVanMoof S3 / X3

Error 43 on your VanMoof S3 or X3: gear not reached

Error 43 is listed as SHIFTER_NOT_IN_GEAR in the error code list: after ten attempts, the e-shifter still hasn't reached the requested gear. So the control works, but mechanically the hub doesn't get into the right position. This is exactly the wear pattern for which we routinely recommend the AutoHub 2-speed hub upgrade instead of repairing the same e-shifter over and over again.

Symptoms

  • The display shows Error 43
  • The bike stays stuck in one gear
  • Shifting takes a long time or happens with a jolt
  • You hear the e-shifter trying to shift without success

Possible causes

  • Wear in the hub so the gear no longer engages
  • An e-shifter that no longer reaches its position
  • A misadjusted or stretched shift cable

How VanFoom fixes Error 43

  1. 1Diagnosis of the error codes and a test of the full shifting range
  2. 2Inspection of hub and e-shifter after dismantling
  3. 3Installing the AutoHub upgrade (2-speed S3, 3-speed X3) as a permanent fix
  4. 4Stress test and test ride before your bike comes back

The original e-shifter lacks a torque sensor, so it keeps faltering again and again. We recommend the AutoHub upgrade: from €369 for the S3 (2-speed hub) and from €429 for the X3 (3-speed hub).

Error 43? We'll fix it.

Book your repair online or give us a call. From S2 to S6, every error code, every part, with genuine VanMoof parts and a warranty.