Error 3BAT_PDOCPVanMoof S3 / X3

VanMoof Error 3 on your S3 or X3: overload when switching on

Error 3 is called BAT_PDOCP: Pre Discharge Overload Circuit Protection. When you switch the bike on, the battery first gently charges up the electronics (pre-discharge). If the battery management system sees more current than expected, this protection steps in. That often points to a connected part drawing too much; which part that is has to be measured.

Symptoms

  • The display shows Error 3 when you switch on
  • The bike doesn't get past start-up
  • No pedal assistance
  • Sometimes the bike does work after several attempts

Possible causes

  • A connected part drawing too much current at start-up
  • An early-stage short circuit in the wiring harness or cartridge
  • A fault in the battery's pre-discharge circuit

How VanFoom fixes Error 3

  1. 1Reading out the error codes and an intake of the fault
  2. 2Measuring the current at switch-on to find the culprit
  3. 3Repairing or replacing the affected part with original VanMoof parts
  4. 4Repeated switch-on test before handover

Your bike is usually ready within 7 working days, at a transparent price.

Error 3? We'll fix it.

Book your repair online or give us a call. From S2 to S6, every error code, every part, with genuine VanMoof parts and a warranty.