How we diagnose your VanMoof
A bike that won't switch on any more, or a code on the display. When that happens, we follow a clear process: first read out and test, then the diagnosis with a price from our price list. And only after that do we pick up the tools. Below you can read exactly what we test, and why we don't start by replacing parts.
What an error code does and doesn't tell you
An error code tells you which system stepped in, not why. The same code can be a broken cable on one bike and a worn part on another. So Error 44 on two S3s side by side in the workshop can mean two completely different repairs.
That's why we never name a cause up front that we haven't tested. For us, a code is a starting point, not a conclusion. We've now written up every code, from the S2 through to the latest generation, so you do know in advance where to start looking.
Step 1: reading out
We start by reading out the bike: the active error code. That gives us a first impression of what's going on.
Depending on the error and your description of the problem, we then test different things.
- We check the wiring harness for broken cables with a tester
- We test the cartridge for proper operation on a test rig
- We test the battery on a test rig or with a battery tester
- We check whether the e-shifter shifts properly, the buttons work, the lights work and the speaker works
- If there are mechanical problems, such as brake pads that need replacing, we check those too
Step 2: the diagnosis and a price
Next, we give you the diagnosis, with a price from our price list. If you agree, we proceed with the repair. If you don't, that's the end of it, and at least you have a clear written overview of what your bike needs.
A complete diagnosis costs €60 for the S2, X2, S3 and X3. For the S5, A5, S6 and S6 Open it's €129: those generations have several ECUs that we have to read out and test one by one. That cost is waived if you have us repair the bike. Your bike is then usually ready within 7 working days, with genuine VanMoof parts and warranty on parts and labour.
Why we don't replace parts straight away
Swapping parts until the code disappears is the most expensive way to repair a bike. That's why we test first, and only then replace anything.
What we test depends on your generation. The S3 and X3 have a single cartridge that holds most of the electronics. On the S5, A5 and S6, VanMoof spread that across several ECUs: the Main ECU as the central brain, the Power ECU for power and battery management, and the User ECU for everything you operate, so display, buttons and lights. Which unit has given up determines what the repair costs, and a dead bike by no means always means the most expensive unit.
The same goes for the S3 and X3. A complaint that seems to point to the cartridge regularly turns out to be a broken cable in the wiring harness. Testing is simply cheaper than guessing.
Want to know what's wrong first?
Book a diagnosis in Nieuwegein or Bleiswijk. You get a fixed price before we replace anything, with genuine VanMoof parts and warranty on parts and labour.