What we do during a VanMoof service
A VanMoof that creaks, feels heavy or squeals when you brake usually isn't a fault, but overdue maintenance. During a service we go over the whole bike in a fixed order: brakes, wheels and tyres, and the drivetrain. Here's exactly what we do, and what it costs.
Why a service
A VanMoof's electronics get all the attention, but most of the bike is plain mechanics: brakes, a chain, bearings, screws. They wear and drift out of line with the miles, and you only notice once it has gone too far. A chain that runs dry for too long takes the sprocket with it. Worn brake pads damage the brake disc.
So a service isn't a clean-up, but a check of everything that wears, with adjusting and cleaning where needed. If we find something bigger, you hear about it first, with a price from our price list. We replace nothing without your go-ahead.
Brakes
The brakes are the first thing we go over, because your safety depends on them. Squealing, a spongy lever or a brake that rubs are all things we sort out here.
- Check the brake pads for wear and replace them if they're worn out
- Align the brake callipers, so the brake doesn't rub and the pads sit square on the disc
- Bleed the brakes if the lever feels spongy
- Clean the brake discs, against squealing and for even braking power
Wheels and tyres
A soft tyre costs you range and makes the bike feel heavy and unsettled. We bring the tyres up to the right pressure and check the rear hub: the hub that houses the gears, which needs to be set correctly to shift cleanly.
- Check the tyre pressure and bring it up to the right value
- Check and adjust the rear hub
Drivetrain
The chain transfers your pedalling power to the rear wheel and is a wear part. We clean and lubricate it, align the chain tensioner so it runs tight and straight, and measure the stretch: that tells us whether it needs replacing now or can wait. On the S3 and X3 we also check the e-shifter, the electronic shifting that is the best-known source of faults on those models.
- Clean and lubricate the chain
- Align the chain tensioner
- Check the e-shifter
Always included: frame, screws and test ride
Before we start we inspect the frame for damage and check the screws: anything loose gets tightened. We finish with a test ride, in which we test the shifting and the motor assistance. Only when that's right is the service done.
What a service costs
A service costs €75 for the S2 and X2 and €109 for the S3, X3, S5 and A5. For other models you hear the price up front. If something comes up during the service that falls outside it, such as a worn chain or brake pads that need replacing, you get a price for that first from the price list.
Once a year is a good rule of thumb, and sooner if the bike creaks, feels heavy or the brakes squeal. Book your service online in Nieuwegein or Bleiswijk, or give us a call.
Due a service?
Book online or give us a call. Nieuwegein or Bleiswijk, from S2 to S6.